Skip to content
CNC spares & automation, Chennai+91 90433 36700

Router spares

Wood Engraving Spindle Motors and NK105 Controllers for CNC Routers

Get air-cooled and water-cooled spindle motors and the NK105 controller for CNC wood engraving and routing machines. Send the spindle power, voltage, body diameter and collet size, or a nameplate photo, for price and availability.

  • Air and water-cooled spindles
  • NK105 controllers
  • Tested before dispatch
  • Pan-India shipping
Human Machine Interface (9)

Spindle Motors and Controllers for Wood Engraving Machines

From Chennai, we supply spindle motors and controllers for CNC wood engraving and routing machines. These parts are chosen for steady, stable running on routers and engraving machines. After the sale, our team can help with selection and installation queries. Our range of products include NK105 wood engraving controller, air cooling spindle motor and water cooled spindle motor. These spindles offer high speed and low noise at a competitive price.

Your next step

Get price & availability

Share the model or part number and quantity. Attach a nameplate photo or BOM on the quote form if you have one.

Request a Quote

In this range

Wood Engraving Spindle Motors and NK105 Controllers Available from EKA CNC

Open a product for its specifications, or add several to one RFQ and send them together.

Wood Graving Spindle Motor

Air Cooling Spindle Motor

Specifications Minimum Order Quantity 1 NOS Power 12 kW Phase Single Phase Speed 24000 Ambient Temperature -25+-85degC Usage/Application Industrial Country of Origin Made in…

View details
Wood Graving Spindle Motor

NK105 Wood Engraving Controller

Specifications Minimum Order Quantity 1 Piece Usage/Application Industrial Operation Mode Automatic Power 1 kW Frequency 23 khz RPM 1600 Country of Origin Made in…

View details
Wood Graving Spindle Motor

Water Cooled Spindle Motor

Specifications Minimum Order Quantity 1 Piece Material SS Current 10A Operating Speed 24000 Power Source Electric Country of Origin Made in India Usage Industrial

View details

Buyer guide

Air-Cooled vs Water-Cooled Spindle Motors

Both types are high-speed motors driven by a VFD. The choice mainly depends on noise, workshop conditions and maintenance.

Point Air-cooled spindle Water-cooled spindle
Cooling Fan on the shaft blows air over the body Coolant circulates through a jacket using a pump
Noise Louder, mainly fan noise at high speed Quieter
Low-speed running Cooling falls as speed falls Cooling stays the same at any speed
Extra equipment None Pump, reservoir or chiller, hoses
Risks Fan draws in dust Freezing, leaks or pump failure cause overheating

Water-cooled spindles suit quiet workshops and long jobs. Air-cooled spindles suit dusty workshops, cold climates and users who want a simpler setup. Never run a water-cooled spindle without coolant flowing, even briefly.

How to Specify a Replacement Router Spindle

A replacement spindle must fit the existing mount and work with the existing VFD. Send these details, or a clear photo of the nameplate:

  • Power: rated kW, for example 1.5 kW or 2.2 kW.
  • Voltage and phase: the motor voltage and the VFD output it runs on.
  • Frequency and speed: rated frequency in Hz and maximum rpm, which must match the VFD settings.
  • Body diameter: must match the spindle clamp on the Z-axis.
  • Collet type: such as ER11, ER16, ER20 or ER25, which decides the tool shank sizes you can use.
  • Cooling type and connector: air or water, and the plug type.

After fitting a new spindle, set the VFD's maximum frequency, rated voltage and current to the spindle nameplate, then run it in at low speed before cutting.

About the NK105 Controller

The NK105 is a standalone handheld controller widely used on 3-axis CNC wood routers and engraving machines. It runs G-code programs loaded from a USB drive, so the machine can work without a PC connected during cutting. The operator uses its keypad to jog the axes, set the work origin, start and pause jobs and adjust speed during a run.

When replacing an NK105, note the version on the label and the cables between the handheld unit, the terminal board and the drives. Match the replacement version where you can, because terminal boards and cables can differ between versions. Back up the machine parameters if the old unit still powers on, so axis pulse settings, travel limits and spindle settings can be re-entered quickly.

Faster quotations

What to Include in Your Enquiry

Send what you have. If a detail is unknown, say so and we will help identify it from a photo or the machine documentation.

  • Photo of the spindle or controller nameplate
  • Spindle power, voltage and maximum rpm
  • Spindle body diameter and collet type
  • Cooling type: air or water
  • Controller model and version, if replacing
  • Quantity and delivery location

Buyer questions

Frequently Asked Questions

Can I replace an air-cooled spindle with a water-cooled one?

Yes, if the body diameter fits your spindle clamp and the power, voltage and frequency match your VFD. You will also need to add a pump, reservoir or chiller, and hoses. Plan the hose route so it moves freely with the Z-axis and does not rub on the gantry.

Does a router spindle need a VFD?

Yes. Router spindles run at high frequency, often 300 Hz to 400 Hz, which a normal mains supply cannot provide. A VFD supplies the correct frequency and lets you set the speed. The VFD must be rated for the spindle's current and set to its nameplate frequency and voltage, otherwise the spindle can overheat.

Which collet size does my spindle use?

The collet type is usually stamped on the spindle nose or nut, or listed on the nameplate. ER11 and ER16 are common on small spindles, and ER20 or ER25 on larger ones. We also supply ER collets in individual shank sizes for routing and engraving tools.

What are signs that a router spindle needs replacing or repair?

Watch for rising noise or a grinding sound, heat at the nose, vibration that shows as poor surface finish, runout on the tool, or the spindle slowing under light load. Noise and heat often point to worn bearings. Check the collet and nut first, because a worn collet can also cause runout.

Can you supply a replacement NK105 controller?

Yes, we supply the NK105 wood engraving controller. Send the version shown on your existing unit and a photo of the terminal board so we can match the cables and board. Keep a record of your machine parameters so they can be re-entered after the replacement.

How do I look after a water-cooled spindle?

Use clean water with anti-corrosion additive or a suitable coolant, check that coolant flows before every start, clean the reservoir regularly and protect it from freezing. Warm the spindle up at low speed after long idle periods. Never run it dry, even briefly, because the bearings and windings can be damaged quickly.

How do I get a quote for a spindle motor?

Send the nameplate photo or the spindle power, voltage, body diameter, collet type and cooling type, with the quantity and delivery location, through the quote request form or to contact@ekacnc.com. We will reply with price and availability and ship across India.

From requirement to quotation

Have a part number or a machine down?

Send the model, nameplate photo or a short description. We check availability, compatible alternatives and lead time, then reply with a quotation.