Motors & motion
Compact AC Geared Motors and Gear Heads for Machines and Conveyors
Compact AC geared motors from 25 W to 90 W, including Panasonic and ZD motors, gear heads, reversible motors and AC speed controllers. Send the motor and gear head model from the nameplate for price and availability.
- Panasonic and ZD motors
- 25 W to 90 W
- Gear heads and controllers
- Pan-India shipping
Compact AC Geared Motors from Chennai
EKA CNC supplies compact AC geared motors from Chennai, including Panasonic geared motors and gear heads, ZD gear head motors, constant speed and reversible AC motors from 25 W to 90 W, and AC motor speed controllers.
Your next step
Get price & availability
Share the model or part number and quantity. Attach a nameplate photo or BOM on the quote form if you have one.
In this range
Compact AC Geared Motors and Gear Heads Available from EKA CNC
Open a product for its specifications, or add several to one RFQ and send them together.
25 Watts AC Motor
Specifications Minimum Order Quantity 0 Piece(s) No of Phase Single Phase Voltage 210-240 V Frequency 50-60 Hz Watt 25 W Current Rated 0.45-0.12 A
40 Watts AC Motor
Specifications Minimum Order Quantity 0 Piece(s) No of Phase Three Phase Frequency 40-50 Hz Watt 40 W Load Torque 5-80kgf.Cm Speed Type Variable Speed
60 Watts AC Motor
Specifications Power 80 W Frequency 50-60 Hz No of Phase Three Phase, Single Phase Brand ZD Motor Rated Voltage 180-260 V Load Torque 10-70…
90 Watts AC Motor
Specifications Minimum Order Quantity 0 Piece(s) Motor Type AC Motor No of Phase Three Phase Current Rated 0.48-0.28 A Watt 90 W
AC Motor Speed Controller
Specifications Current 1-4 A Frequency 40-50 Hz Rated Voltage 210-240 V Motor Type AC Motor
Compact AC Geared Motors
Specifications Brand ZD Motor Power 10-50 W Speed 1300-1440 RPM Voltage 210-240 V Phase Three Phase Frequency 40-50 Hz
Constant Speed AC Geared Motors
Specifications Output Power 25 W Phase Single Phase Brand ZD Motor Speed 1350 RPM Voltage 220 V Frequency 50-60 Hz Current 0.25 A
M8MX25G4YGA Panasonic 25 Watts AC Geared Motor
Specifications Minimum Order Quantity 1 Piece Brand Panasonic Phase Three Phase Power (Watts or HP) 25 W Motor Voltage 230 V Speed (Rpm) 1300
M91X40G4GGA Panasonic 40 Watts Compact Gear Motor
Specifications Minimum Order Quantity 1 Piece Brand Panasonic Power 40 W Speed 1300-1600 RPM
M91Z60G4GGA Panasonic 60 Watts Compact Gear Motor
Specifications Minimum Order Quantity 1 Piece Speed 1300 RPM Voltage 210-240 V Power 60 W Brand Panasonic Phase Single Phase
M9MX40G4YGA Panasonic 40 Watts Compact Gear Motor
Specifications Minimum Order Quantity 1 Piece Voltage 210-230 V Power 40 W Brand Panasonic Phase Three Phase Speed 1300-1500 RPM
Miniature AC Motors
Specifications Voltage 220 V Brand ZD Motor Frequency 50 Hz Phase Three Phase Speed 1250 RPM Power 10 W Current 0.14A
Panasonic Gear Head Motor
Panasonic geared motors supplied by EKA CNC, Chennai.
Panasonic Geared Motor
Specifications Minimum Order Quantity 1 Piece Speed 1200-1400 RPM Brand Panasonic Power 25-90 W Phase Three Phase, Single Phase Frequency 50-60 Hz
Panasonic Geared Motors
Specifications Minimum Order Quantity 1 Piece Voltage 210-280 V Phase Single-Phase/Three Phase Speed 1300 RPM Power 25-90 Watts
Reversible AC Motor
Specifications Brand ZD Motor Phase Single Phase Output Power 25-60 W Current 0.45-0.12 A Rated Voltage 210-240 V
Small AC Geared Motors
Specifications Speed 1350 RPM Power 25 W Voltage 220 V Brand ZD Motor Current 0.25 A
ZD Gear Head AC Geared Motor
Specifications Output Power 1.5-5 kW Phase Single Phase Frequency 50-60 Hz Current Rated 0.40-0.12 A
ZD Geared Motor
Specifications Frequency 50-60 Hz Phase Three Phase Brand ZD Motor Power 10-100 KW Current Rated 0.48-0.28 A Speed Type Variable Speed
Buyer guide
How to Specify a Compact Geared Motor
- Output power: 25 W, 40 W, 60 W or 90 W, as printed on the motor nameplate.
- Frame size: the square flange size. Motor and gear head must have the same frame size.
- Motor type: induction (constant speed, one direction at a time), reversible (for frequent start, stop and direction change) or speed-control type used with a speed controller.
- Supply: single-phase 230 V is most common; three-phase versions also exist. The run capacitor value must suit the motor.
- Gear ratio: output speed is roughly the motor speed divided by the gear ratio. Higher ratios give more torque but the gear head's permitted torque sets the limit.
- Shaft: the motor's pinion shaft must match the gear head. A round-shaft motor cannot take a gear head.
When in doubt, send photos of both nameplates, the motor and the gear head.
Common Problems with Small Geared Motors
- Motor hums but does not start: often a failed run capacitor, or the load is jammed.
- Motor runs hot: overload, a wrong capacitor, a duty cycle too high for a reversible motor, or poor ventilation.
- Grinding noise or play at the output: worn gears or bearings in the gear head. The gear head can often be replaced without changing the motor.
- Speed not steady with a controller: check the controller setting, the tacho-generator wiring on speed-control motors and the load.
- Oil or grease leak: damaged output shaft seal.
Replacing the capacitor or gear head is cheaper than a complete motor, so check these parts first.
Faster quotations
What to Include in Your Enquiry
Send what you have. If a detail is unknown, say so and we will help identify it from a photo or the machine documentation.
- Motor model and gear head model from both nameplates
- Output power (W), voltage and phase
- Gear ratio or required output speed
- Speed controller model, if used
- Photo of the motor, flange and shaft
- Quantity and delivery location
Buyer questions
Frequently Asked Questions
Which compact geared motors do you supply?
This page lists Panasonic compact geared motors such as M8MX25G4YGA (25 W), M9MX40G4YGA and M91X40G4GGA (40 W) and M91Z60G4GGA (60 W), ZD gear head motors, constant speed and reversible AC motors up to 90 W, miniature AC motors and AC motor speed controllers. Send the model you need to confirm availability.
Can I buy the gear head separately from the motor?
Usually yes. Gear heads are often sold separately so you can change the ratio or replace a worn gear head. The gear head must match the motor's frame size and pinion shaft type. Send the existing gear head model, or the motor model and required ratio, and we will confirm the matching part.
What is the difference between an induction motor and a reversible motor?
An induction motor is meant for continuous running in one direction at a time. A reversible motor is built for frequent starts, stops and direction changes, and usually has a simple friction brake. Reversible motors are often rated for limited duty time, so check the duty rating if your machine runs them for long periods.
How do I change the speed of a compact AC motor?
Either change the gear ratio, which changes the output speed in fixed steps, or use a speed-control motor with an AC motor speed controller for adjustable speed. A small VFD can also control three-phase compact motors. Tell us the speed range you need and we will suggest the simplest option.
Can a Panasonic geared motor replace a different brand?
It can if the frame size, mounting holes, output shaft, power, voltage and speed match your machine. Compact geared motors from different makers often use similar frame sizes, but shaft and key dimensions can differ. Send photos and the old nameplate, and we will check the closest fit before you order.
How should I maintain a compact geared motor?
Keep the motor clean so it can cool, check the mounting bolts and coupling or chain alignment, and listen for new gear noise. Most small gear heads are grease-lubricated for life. Replace a weak run capacitor if starting becomes sluggish, and avoid overloading the output beyond the gear head's permitted torque.
How do I get a price and delivery time?
Send the motor and gear head model numbers with quantities through our request a quote form, by email or by phone. If the nameplate is unreadable, send photos and the dimensions of the flange and shaft. We will reply with price, availability and dispatch details.
From requirement to quotation
Have a part number or a machine down?
Send the model, nameplate photo or a short description. We check availability, compatible alternatives and lead time, then reply with a quotation.



















