Mindman Air Preparation Units (FRL) Supplier in Chennai

An FRL has three functions: filter, regulator and lubricator. A filter regulator combines only the filter and regulator in one body. Use the FR when the downstream components are pre-lubricated or must stay oil-free, for example in food packing or where air is blown on parts. Use the FRL where valves and cylinders expect lubricated air.

This page lists MACP, MACC and MACT filter regulator lubricators, MAFR filter regulators, MAR regulators, MAIR precision regulators, MAF filters and MAL lubricators in several sizes. Send the model number you have, or the port size and flow you need, and we will confirm availability.

Often yes. Filter elements, bowls, gauges and drains are usually replaceable as spares. Send the full Mindman model number and a photo of the unit so we can identify the correct part. If spares are not available for an older model, we can quote a complete replacement unit of the same port size.

It depends on how clean your compressed air is. As a guide, check the element every few months and replace it when it is visibly dirty or when the pressure drop across the filter increases. Drain the bowl regularly so water does not pass downstream. A dryer before the FRL greatly extends element life.

Use a light oil intended for pneumatic equipment, as recommended in the Mindman manual. Do not use compressor oil, engine oil or oils with additives that can attack seals. Set the drip rate low and increase it only if the downstream components need it. Too much oil leads to sticky valves and oily exhaust.

Send the Mindman model numbers and quantities through our request a quote form, by email or by phone. If you do not have a model number, send the port size, pressure and photos. We will reply with price, availability and dispatch details.