Spindle and tooling
BT40 and BT50 Spindle Drawbar Collets for CNC Machines
EKA CNC supplies spindle drawbar collets and clamping claws in BT, CAT, DIN, ISO, HSK and SK types, plus BT tool holders. Send the spindle taper, pull stud angle and machine make for price and availability.
- BT30, BT40, BT50 tapers
- 45° claw collets
- New and used holders
- Ships across India
CNC Spindle Drawbar Collets and Clamping Claws
EKA CNC offers a wide range of spindle drawbar collets and holders in BT, CAT, DIN, OTT, ISO, HSK and SK types, including BT40 spindle broaching claws and other spindle collets. We ship collets and holders across India and overseas.
We deal in brands such as ACROW, ROYAL, BRIGHT, OTT, CHUM POWER and ROHM, among other spindle collet brands. These collet and tool holder standards originate from Taiwan, Germany, Korea and Japan.
Keeping Collets and Toolholders Clean
To ensure proper performance of your toolholders, overall cleanliness of toolholder, collet pocket, collet, and nut must be maintained. It’s important to remember that all these components are manufactured to perform within tolerances of ten-thousandths (.0001”) of an inch.
Any dirt, dust, oil, chips, or other contaminant left on the spindle, taper, flange, collet, collet pocket, or nut can cause poor T.I.R. (runout) leading to premature wear of cutting tool, toolholder, and spindle mouth.
We recommend a regular preventive maintenance programme be implemented in your shop to protect your investment in cutting tools, toolholders, and collets, and reduce scrap.
Drawbar Collet Dimensions
BT Tooling, ATC and Productivity
BT tools allow use of ATC (Automatic Tool Change) technology to maximize the speed and productivity of manufacturing.
BT tool holders perform work with high strains and pressures, so be sure to store them safely without any chance for the tool being damaged – as this may cause some misbalance that can be critical at high speeds and precise CNC machinery.
BT Tool Holders
The right BT holder for each machining task makes the job more efficient. Our team can help you select the most appropriate BT tool holder for your application.
We supply a wide selection of new and used BT tool holders from brands such as Sandvik, Acrow and Techno.
BT30, BT40, BT50 tool holders and collets are available with various dimensions taper with multiple specifications. Collet chuck holders, shrink-fit holders and calibration tools are also available.
Your next step
Get price & availability
Share the model or part number and quantity. Attach a nameplate photo or BOM on the quote form if you have one.
In this range
BT40 and BT50 Spindle Drawbar Collets Available from EKA CNC
Open a product for its specifications, or add several to one RFQ and send them together.
BT40 Spindle clamp claw pull tab 4 spindle CNC with 45 degrees
BT40 Spindle Collet comes Two type INNER Thread and OUTER Thread in a range of sizes designated as BT Type is BT 30, BT…
BT50 Spindle clamp claw pull tab 4 spindle CNC with 45 degrees
BT50 collet for Milling Centers
Buyer guide
How to Identify the Right Drawbar Collet
The drawbar collet, also called a gripper, claw or clamping segment set, grips the pull stud on the tool holder and pulls the taper into the spindle. It must match both the spindle drawbar and the pull stud. Check these points:
- Spindle taper: BT30, BT40 or BT50, or CAT, DIN, ISO, SK or HSK equivalents.
- Pull stud angle: the angle under the pull stud head, commonly 45°, 60° or 90°. The collet must match it; the BT40 and BT50 claws in our catalogue are 45° types.
- Number of segments: many drawbar collets use four segments or fingers.
- Drawbar make and design: the collet must fit the drawbar rod and sleeve. OTT and similar systems have their own dimensions.
- Machine make and model: helps confirm the spindle and drawbar type.
If you are unsure, send photos of the old collet beside a ruler, the pull stud and the spindle nameplate.
Signs a Spindle Drawbar Collet Needs Replacing
- Tools pulling out or moving under heavy cuts, or witness marks on the tool holder taper.
- Chatter and poor finish that improve when a different holder is used, pointing to low clamping force.
- Tool change alarms such as tool clamp or unclamp confirmation faults.
- Worn, chipped or cracked fingers visible when the drawbar is removed.
- Low drawbar force measured with a drawbar force gauge, compared with the machine maker's figure.
Low clamping force is not always the collet. Tired disc springs in the drawbar stack, worn pull studs or a damaged spindle taper produce similar symptoms. Measure drawbar force, inspect the pull studs and check the disc spring stack before replacing parts. Running with weak clamping can damage the spindle taper, which is far more costly to repair.
Faster quotations
What to Include in Your Enquiry
Send what you have. If a detail is unknown, say so and we will help identify it from a photo or the machine documentation.
- Spindle taper: BT30, BT40, BT50 or other
- Pull stud angle and pull stud part number
- Machine make, model and spindle type
- Photo of the old collet beside a ruler
- Quantity and delivery location
Buyer questions
Frequently Asked Questions
What is a spindle drawbar collet?
It is the set of gripping fingers at the end of the spindle drawbar. When the drawbar is pulled back by its disc spring stack, the fingers close around the pull stud of the tool holder and draw the taper firmly into the spindle. When the drawbar is pushed forward for a tool change, the fingers open and release the tool.
Do BT40 collets fit every BT40 spindle?
No. The taper size tells you the tool holder standard, but the drawbar collet must also match the pull stud angle and the drawbar design of your spindle. Two BT40 machines from different makers can use different collets. Send the machine make and model and a photo of the old collet.
What pull stud angle do I need?
Use the angle specified by the machine maker for your spindle. Common angles are 45°, 60° and 90°. The pull stud and the drawbar collet must have the same angle, otherwise clamping force is reduced and the stud and collet wear quickly. The angle is often marked on the pull stud or shown in the machine manual.
Should I replace pull studs when I replace the collet?
It is good practice to inspect them and replace any that are worn, cracked or corroded. A worn pull stud can damage a new collet, and pull stud failure at high speed is dangerous. Many shops replace pull studs on a schedule because they are inexpensive compared with spindle damage.
Do you supply BT tool holders as well as collets?
Yes. We supply a wide selection of new and used BT30, BT40 and BT50 tool holders from brands such as Sandvik, Acrow and Techno, along with collet chuck holders. Tell us the taper, holder type and tool shank size you need.
How do I keep tool holders and spindle collets in good condition?
Wipe the taper, flange and pull stud before each tool goes into the spindle, keep holders in a clean rack, and never use compressed air to blow chips into the spindle. Check the spindle taper for marks and measure runout regularly. Set up a preventive maintenance routine that includes drawbar force checks.
How do I get a quote for a drawbar collet?
Send the spindle taper, pull stud angle, machine make and model, and a photo of the old collet with a ruler beside it, through the quote request form or to contact@ekacnc.com. We will confirm the matching part, price and availability.
Keep exploring
Related Products and Services
From requirement to quotation
Have a part number or a machine down?
Send the model, nameplate photo or a short description. We check availability, compatible alternatives and lead time, then reply with a quotation.

