Skip to content
CNC spares & automation, Chennai+91 90433 36700

Drives and automation

VFD Drives Supplier in Chennai: Delta, Fuji and CG Emotron

Source variable frequency drives from Delta, Fuji, CG Emotron and Crompton Greaves for CNC machines and industrial motors. Send the existing drive model, or the motor kW, voltage and application, and we will quote a suitable VFD.

  • Delta, Fuji, CG Emotron
  • Replacement and new installs
  • Tested before dispatch
  • Pan-India shipping
VFD DRIVES AND VFD AUTOMATION SOLUTIONS PROVIDER

VFD Drives and Drive Automation Products

EKA CNC supplies VFDs (variable frequency drives) and Industrial VFD automation products and components in India. We supply VFDs at competitive prices for reliable and precise load handling. Speed can also be held in closed loop using feedback sensors.

The variable frequency drives we supply are used in industries such as plastics, textiles, ceramics, electronics, oil, mining, pharmaceuticals, agricultural, etc.

VFD Drives for CNC Machines and Industrial Motors

Variable Frequency Drives (VFDs) are essential components in modern CNC machinery, providing precise control over motor speed and torque. At EKA CNC, we supply VFD drives that improve the efficiency, reliability, and versatility of your CNC equipment. A correctly selected VFD reduces energy use on variable loads and lowers starting stress on your motors.

What to Expect from the VFDs We Supply

  • Enhanced Motor Control: Our VFD Drives provide precise control over motor speed and torque, allowing for smooth and accurate adjustments. This ensures optimal performance for a variety of machining tasks and enhances overall productivity.
  • Energy Efficiency: By adjusting the motor speed to match the load requirements, VFDs can reduce energy consumption considerably compared with fixed-speed motor control, especially on fans and pumps. This not only lowers operational costs but also contributes to a more sustainable operation.
  • Improved Performance: With advanced control algorithms and high-quality components, modern VFDs offer stable and reliable performance. Experience smoother operation, reduced vibrations, and improved machining quality.
  • Versatile Applications: Our VFD Drives are suitable for a wide range of CNC applications, including milling machines, lathes, drill presses, CNC routers and automated production systems.
  • Durable Construction: Industrial VFDs are built for continuous duty. Installed in a clean, ventilated enclosure, they give long and reliable service.
  • User-Friendly Interface: Equipped with intuitive controls and easy-to-read displays, our VFD Drives are simple to set up and operate. Adjustable settings and programmable functions allow for customized control tailored to your specific needs.
  • Seamless Integration: Our VFD Drives are designed for easy integration with existing CNC systems and equipment. With versatile connectivity options and straightforward installation, you can enhance your machinery with minimal disruption.

Benefits of Using VFD Drives

  • Precision Control: Achieve accurate and responsive control over motor operations, enhancing the quality and precision of your machining processes.
  • Energy Savings: Reduce energy consumption and operational costs with efficient motor control.
  • Enhanced Reliability: Enjoy reliable performance and extended motor life with advanced drive technology.
  • Operational Flexibility: Adapt to various machining tasks and load conditions with customizable settings and programmable features.

EKA CNC is an independent reseller of Delta products, not an authorised dealer or distributor. Brand names are trademarks of their owners.

Your next step

Get price & availability

Share the model or part number and quantity. Attach a nameplate photo or BOM on the quote form if you have one.

Request a Quote

In this range

VFD Drives Available from EKA CNC

Open a product for its specifications, or add several to one RFQ and send them together.

VFD Drives

CG Make Emotron VFD

Specifications Minimum Order Quantity 1 Piece Input Phase Single Phase & Three Phase Motor Power (kW) 0.5 KW - 400 KW Brand Crompton Greaves…

View details
VFD Drives

Crompton Greaves VFD

Specifications Minimum Order Quantity 1 Piece Phase Three Phase, Single Phase Brand CG IP Rating IP20 Output Type Triple Condition New

View details
VFD Drives

Fuji Drives

Specifications Brand Fuji Motor Power (kW) 3.7 kW – 75 kW Input Phase Single & Three Phase Both Output Phase Three Phase Motor RPM…

View details

Buyer guide

How to Select a VFD

When replacing a drive, the existing model number is the quickest route to a match. For a new installation, these points decide the right VFD:

  • Motor rating: kW, full-load current and rated voltage from the motor nameplate. Size the drive on current, not only on kW.
  • Supply: single-phase 230V or three-phase 415V input.
  • Load type: fans and pumps are variable-torque loads and can use a normal-duty rating. Conveyors, mixers, spindles and hoists are constant-torque loads and usually need a heavy-duty rating with higher overload capacity.
  • Control mode: V/f control suits simple speed control. Sensorless vector or closed-loop vector control gives better torque at low speed.
  • Braking: fast stops or high-inertia loads may need a braking resistor or braking unit.
  • Control and communication: analogue speed reference, digital inputs, or a fieldbus such as Modbus RTU.
  • Installation: ambient temperature, enclosure space and motor cable length, which may need an output reactor.

Replacing a Failed VFD

Before removing a failed drive, record its full model number and, if the keypad still works, note or back up the parameter settings. Many drives allow parameter copy through the keypad or PC software, and this saves hours when commissioning the replacement.

Find out why the drive failed. Repeated overcurrent trips can point to a motor or cable insulation fault. Overvoltage trips during deceleration usually mean the stop time is too short or a braking resistor is needed. Overheating is often caused by a blocked cooling fan or a dusty heatsink. Fixing the cause protects the new drive.

A same-brand, same-series replacement is easiest because terminals and parameters match. If that model is obsolete, we can suggest a current equivalent. Send the old model, the motor nameplate and how the drive is controlled so we can quote the right alternative.

Faster quotations

What to Include in Your Enquiry

Send what you have. If a detail is unknown, say so and we will help identify it from a photo or the machine documentation.

  • Existing drive make and model number
  • Motor kW, full-load current and voltage
  • Supply: single-phase or three-phase
  • Application and load type, for example pump or spindle
  • Control method: keypad, analogue, digital or Modbus
  • Quantity and delivery location

Buyer questions

Frequently Asked Questions

Which VFD brands can you supply?

Our VFD range includes Delta, Fuji, CG Emotron and Crompton Greaves drives. Brand names describe the products we supply. If you need another make or an obsolete model, send the model number through our part finder and we will check whether we can source it or suggest an equivalent.

How do I choose the right VFD size for my motor?

Use the motor's full-load current and voltage from its nameplate, then choose a drive whose rated output current is equal to or higher than that figure for your duty. Constant-torque loads such as conveyors and spindles usually need the heavy-duty rating. If you are unsure, send the motor nameplate and the application and we will recommend a size.

Can I replace my old drive with a different brand?

Yes, in most cases, provided the new drive matches the motor current, supply voltage and control signals. The terminal layout and parameter numbers will differ, so the drive must be wired and programmed again. Send the old drive model and a photo of the control wiring and we will check the I/O you need.

Can a VFD run a single-phase motor?

Standard VFDs are designed for three-phase induction motors. Many small drives accept a single-phase 230V input and give a three-phase 230V output, which suits a three-phase motor wired for 230V. Ordinary single-phase motors with start capacitors are generally not suitable for standard VFD control.

Do I need a braking resistor?

You need one if the load must stop quickly or if it has high inertia, such as large fans, centrifuges or vertical axes. Without it, the drive may trip on overvoltage during deceleration. Tell us the stop time you need and the load type, and we will check whether the chosen drive needs a resistor or a braking unit.

What maintenance does a VFD need?

Keep the heatsink and cooling fans clean and the enclosure ventilated, check terminal tightness periodically, and keep a record of the parameter settings. Cooling fans and DC bus capacitors wear with age and heat, so drives in service for many years may need these parts checked or replaced.

Do you supply complete VFD panels as well as drives?

Yes. Along with loose drives, EKA CNC builds VFD control panels with the drive, protection, controls and wiring in one enclosure. See our VFD control panel page and send your motor list and requirements for a quote.

How do I get a quote for a VFD?

Send the existing drive model, or the motor nameplate details and application, with the quantity and delivery location through the quote request form, email or phone. We will confirm the matching drive, its price and availability. We ship across India.

From requirement to quotation

Have a part number or a machine down?

Send the model, nameplate photo or a short description. We check availability, compatible alternatives and lead time, then reply with a quotation.